Vodes wrote: 6a2d17

Well. All the stuff came in yesterday morning. So I made a case out of some wood I found in my basement. It was my first time soldering anything. I'm okay with what came out of it xd It's a Pro Micro (5v, 16mhz) I bought from mehkee aswell as the keyswitches (Kailh Speed Copper). The keycaps are some cheap blue ones from banggood.

As for people living in shipping was quite fast except for the mehkee stuff. (Almost 2 weeks for that)

Pictures (bad Camera used)

Good job with the build there. Can't wait to see the demo.

Kiciuk wrote: 673ys

What's better these keypads can be made with almost anything.
I made mine with old pad PCB.
Only soldered switches properly and it works.

Overall cost=2 switches 0.52$
Yes i know it looks like shit, but hey it works.

A friend of mine built an SDVX controller with a shoebox... A cardboard one.

He still kicked my ass with it

Waiting for that demo

Here is a bad video for my keyboard

Vodes wrote: 6a2d17

Here is a bad video for my keyboard

Youtube Video

Don't worry, mine sounds like a toy too. My Sanwa build sounds like hitting a shoebox with a stick.

The Gambler wrote: 6p2n66

Vodes wrote: 6a2d17

Here is a bad video for my keyboard

Youtube Video

Don't worry, mine sounds like a toy too. My Sanwa build sounds like hitting a shoebox with a stick.

Imaginating it is hilarious enough xD

For Teesy 2.0 and 2.0 ++ this will work?

TV-Size Kun wrote: 361u5a

For Teesy 2.0 and 2.0 ++ this will work?

Yes, just to select Teensy 2.0 or 2.0++ in the boards sections of the Arduino, assuming you are using Teensyduino.

I know this post is pretty old, but I just want to say thank you for this guide. It helped me a lot!

DireDoge wrote: 303v4u

I know this post is pretty old, but I just want to say thank you for this guide. It helped me a lot!

Pics or it didn't happen

Also, no problem. Kinda wish this was stickied though.

New build posted on the first post. Happy holidays everyone!!

New build for you guys. This time, a possible 8-key design, using an Adafruit Feather M0 for the controller.

I can't understand any thing about some techinacl shit anyone can help me

In indonesia someone sell it the price is too high about 40$ and I can't use my credit card too (controlled by my mom)

quinton69 wrote: u7362

I can't understand any thing about some techinacl shit anyone can help me

In indonesia someone sell it the price is too high about 40$ and I can't use my credit card too (controlled by my mom)

RIP... Hopefully I could update the guide as well when I have time.

Anyone know teensy alternative for the no-no keyboard i found the Leonardo one help me pls and in Indonesia it's very rare to found 3d printing place

quinton69 wrote: u7362

Anyone know teensy alternative for the no-no keyboard i found the Leonardo one help me pls and in Indonesia it's very rare to found 3d printing place

Leonardo is perfectly adequate for the job, since it contans all the native USB hardware needed for the keyboard functions to work. The only reason I don't recommend these is that their footprint is quite large. Take a look at some sample boards below:

Leonardo:
Teensy LC/3.2:
Pro Micro:
Trinket M0 (in inches):
It all depends on the chip you are using, but also importantly, how the board is implemented.

At some point, you might also have to leard KiCAD/Eagle to learn how to mount chips directly to PCB. Nono most likely has already done that, along with Techkeys, MaxKeyboard, etc...

Can you send me the Arduino coding pls I'm using the two keys shift and z

Do you know the alternative for the pcb

quinton69 wrote: u7362

Can you send me the Arduino coding pls I'm using the two keys shift and z

Do you know the alternative for the pcb

Code is in the OP, though you will have to modify it for your purposes.

quinton69 wrote: u7362

Can you send me the Arduino coding pls I'm using the two keys shift and z

Do you know the alternative for the pcb

I already made my code for the pro micro. You just need to tell me your keys and the pins, that you're using, then i'll do it for you. (If you'll use the pro micro ofc)

Is this will work with arduino nano ? or i must use like leonardo or uno? I want to use arduino Nano or Mini because it's cheap here xD

Thx to this guide i have managed to make my own osu keyboard.I wanted to thank you and here are some pictures of how mine turned out.



Also i have never wrote code for an arduino pro micro, but this is what i came up with.:

int buttonPin = 9;
int Pinbutton = 6;
#include <Keyboard.h>
void setup()
{
pinMode(buttonPin, INPUT);
digitalWrite(buttonPin, HIGH);
pinMode(Pinbutton, INPUT);
digitalWrite(Pinbutton, HIGH);
}

void loop()
{
if (digitalRead(buttonPin) == 0)
{
Keyboard.press('z');
delay(5);
}
if (digitalRead(buttonPin) == 1)
{
Keyboard.release('z');
}
if (digitalRead(Pinbutton) == 0)
{
Keyboard.press('x');
delay(5);
}
if (digitalRead(Pinbutton) == 1)
{
Keyboard.release('x');
}
}

It works just fine but if someone can edit it to make it better i would appreciate it.
THX FOR THE AWESOME GUIDE.

^^ No problem

Will update the guides soon. Hopefully by this week.

thanks for the interesting article, I'm already going to buy all the details and start assembling))

ikorus1 wrote: 1q5l3k

Thx to this guide i have managed to make my own osu keyboard.I wanted to thank you and here are some pictures of how mine turned out.



Also i have never wrote code for an arduino pro micro, but this is what i came up with.:

int buttonPin = 9;
int Pinbutton = 6;
#include <Keyboard.h>
void setup()
{
pinMode(buttonPin, INPUT);
digitalWrite(buttonPin, HIGH);
pinMode(Pinbutton, INPUT);
digitalWrite(Pinbutton, HIGH);
}

void loop()
{
if (digitalRead(buttonPin) == 0)
{
Keyboard.press('z');
delay(5);
}
if (digitalRead(buttonPin) == 1)
{
Keyboard.release('z');
}
if (digitalRead(Pinbutton) == 0)
{
Keyboard.press('x');
delay(5);
}
if (digitalRead(Pinbutton) == 1)
{
Keyboard.release('x');
}
}

It works just fine but if someone can edit it to make it better i would appreciate it.
THX FOR THE AWESOME GUIDE.

Nice one! I built mine with the Pro Micro too. Isn't your keyboard a bit tall? Seems hard to get your fingers to
Edit: Why did you put delays in the code?

hello, today my arduino came to me and I finally made my custom small keyboard .. That's how it looks so far (I plan to paste it with a print and add the LEDs). Here is the code itself (took from the author above and reworked under 6 buttons). Good luck to all

int buttonPin1 = 4;
int buttonPin2 = 5;
int buttonPin3 = 6;
int buttonPin4 = 7;
int buttonPin5 = 8;
int buttonPin6 = 9;
#include <Keyboard.h>
void setup()
{
pinMode(buttonPin1, INPUT);
digitalWrite(buttonPin1, HIGH);
pinMode(buttonPin2, INPUT);
digitalWrite(buttonPin2, HIGH);
pinMode(buttonPin3, INPUT);
digitalWrite(buttonPin3, HIGH);
pinMode(buttonPin4, INPUT);
digitalWrite(buttonPin4, HIGH);
pinMode(buttonPin5, INPUT);
digitalWrite(buttonPin5, HIGH);
pinMode(buttonPin6, INPUT);
digitalWrite(buttonPin6, HIGH);
}

void loop()
{
if (digitalRead(buttonPin1) == 0)
{
Keyboard.press('z');
delay(5);
}
if (digitalRead(buttonPin1) == 1)
{
Keyboard.release('z');
}
if (digitalRead(buttonPin2) == 0)
{
Keyboard.press('x');
delay(5);
}
if (digitalRead(buttonPin2) == 1)
{
Keyboard.release('x');
}
if (digitalRead(buttonPin3) == 0)
{
Keyboard.press('c');
delay(5);
}
if (digitalRead(buttonPin3) == 1)
{
Keyboard.release('c');
}
if (digitalRead(buttonPin4) == 0)
{
Keyboard.press('`');
delay(5);
}
if (digitalRead(buttonPin4) == 1)
{
Keyboard.release('`');
}
if (digitalRead(buttonPin5) == 0)
{
Keyboard.press(KEY_TAB);
delay(5);
}
if (digitalRead(buttonPin5) == 1)
{
Keyboard.release(KEY_TAB);
}
if (digitalRead(buttonPin6) == 0)
{
Keyboard.press(KEY_ESC);
delay(5);
}
if (digitalRead(buttonPin6) == 1)
{
Keyboard.release(KEY_ESC);
}
}

Awesome

thnikk osu keypad style
2 hours of solding, 15 min of programming

Code:

#include <Keyboard.h>

void setup() {
Keyboard.begin();
Serial.begin(9600);
}

void loop() {
Serial.println(digitalRead(A2));
if (digitalRead(A2) == HIGH) {
Keyboard.press('w');
}
else {
Keyboard.release('w');
}

Serial.println(digitalRead(A1));
if (digitalRead(A1) == HIGH) {
Keyboard.press('e');
}
else {
Keyboard.release('e');
}
}

Hey, thanks OP for this post!

5 days ago I didn't know anything about Arduinos, Mechanical Keyboards, soldering, 3D-modelizing... learnt it all, and I managed to end up with this, which I'm pretty proud of:

Basically, I bought a Chinese Arduino Pro Micro clone on ebay for less than 3€ and some Cherry MX Silver Switches for about 5€ (I recommend not buying these for developping purposes, they're very expensive on eBay, maybe buy Kailh or any other brand for prototyping), made the case 3D-printed on a P2P website for 6€, and bought for 2.5€ of screws/bolts.

I first learned Arduino code from scratch and gathered some help from the previous posters on this thread, but I end up with my own code, in which I added some extra LEDs (because I don't have any SMD LEDs to add to my switches for now), and I'm planning to add 3 extra buttons (Space, Escape, and Retry) in the future.

Then I bought a soldering iron and started prototyping my keyboard with some breadboard and jumper wires, to learn code and experiment a bit more. When I ended up with something functionnal, I started deg the case (on Tinkercad, very simple to use) and got it printed.
The holes I designed were made for M5 Screws (5.25mm diameter), but they didnt fit, so I ended up using M4 screws (working pretty well).

Here is the code I used:

#include <Keyboard.h>

int W = 2;

int X = 8;

int LED1 = 6;

int LED2 = 7;



void setup()

{

Serial.begin(9600);



pinMode(W, INPUT); 

pinMode(LED1, OUTPUT);

digitalWrite(W, HIGH);



pinMode(X, INPUT);

pinMode(LED2, OUTPUT);

digitalWrite(X, HIGH);

}



void loop(){



if (digitalRead(W) == 0)

{

Keyboard.press('z');

digitalWrite(LED1, HIGH);

delay(5);

}





if (digitalRead(W) == 1)

{

Keyboard.release('z');

digitalWrite(LED1, LOW);

}







if (digitalRead(X) == 0)

{

Keyboard.press('x');

digitalWrite(LED2, HIGH);

delay(5);

}



if (digitalRead(X) == 1)

{

Keyboard.release('x');

digitalWrite(LED2, LOW);

} 

}

(keep in mind that I'm using a AZERTY keyboard, that the Arduino IDE doesn't recognize (I guess?))

If you have some questions before jumping into it, don't hesitate ! It's such an easy and great project to start with !

I can send you the 3D file of the case, but it will be even better if you find your own design and let your mind express.

PS: Cherry MX Silver Speed switches are amazing, getting from laptop-keyboard to those is for real amazing !

C0MP0T3 wrote: 1g6i6q

-snip-

Your build looks a lot like my second build. Congrats!

I even used M4 bolts on my second build as a matter of fact

UPDATE July 20, 2018:

So yeah, just finished summer school recently and currently working on revamping the guide as usual. Really, this time I am doing it since it will be published on other forums/sites as well. Hopefully those will address some issues associated with the first revision of the keyboard build guide.

The guide will be focused towards an 8-key model that I posted in this thread earlier this year. Any deviations in the design will be an exercise for the end . Of course, PMing me for help will be answered as quickly as possible.

For now, Sanwa build V2 in progress. I tried to do honeycomb walls for this build.

So im staring with a pro micro arduino, can i have the code for two buttons ? I use z and x

AddDominator wrote: 2p3o6q

So im staring with a pro micro arduino, can i have the code for two buttons ? I use z and x

U must make a picture of your arduino, then I will help u

The example code in the first post should also work for Pro Micro, since it uses Arduino keyboard library, not a Teensy specific one.

UnleashedMyself wrote: 294t

AddDominator wrote: 2p3o6q

So im staring with a pro micro arduino, can i have the code for two buttons ? I use z and x

U must make a picture of your arduino, then I will help u

Since my camera broke, i can only use internet picture
https://imgur.com/a/1J6D2w8
P/S: Does Pro Micro have internal resistors ?

The Gambler wrote: 6p2n66

UPDATE July 20, 2018:

So yeah, just finished summer school recently and currently working on revamping the guide as usual. Really, this time I am doing it since it will be published on other forums/sites as well. Hopefully those will address some issues associated with the first revision of the keyboard build guide.

The guide will be focused towards an 8-key model that I posted in this thread earlier this year. Any deviations in the design will be an exercise for the end . Of course, PMing me for help will be answered as quickly as possible.

For now, Sanwa build V2 in progress. I tried to do honeycomb walls for this build.

I'm starting to play Mania more and more, I may be doing a 4k keyboard later ! What's "Sanwa" build?

C0MP0T3 wrote: 1g6i6q

I'm starting to play Mania more and more, I may be doing a 4k keyboard later ! What's "Sanwa" build?

Sanwa V1 is posted in the first post; it is basically the osu! keypad using arcade buttons. The most prominent switch amongst arcade setups use circular Sanwa buttons.

I have add keyboard and hid library but it keep showing this error, please help
https://imgur.com/a/eqTd1XI

AddDominator wrote: 2p3o6q

I have add keyboard and hid library but it keep showing this error, please help
https://imgur.com/a/eqTd1XI

You need Keyboard.begin() in setup() before doing any keyboard presses.

How to add more LED mode for RGB ? Like pressing a button and it will change the mode. My code is like this

AddDominator wrote: 2p3o6q

How to add more LED mode for RGB ? Like pressing a button and it will change the mode. My code is like this

int ButtonZ = 9;
int ButtonX = 10;


void setup()
{
pinMode(ButtonZ, INPUT);



pinMode(ButtonX, INPUT);


}

void loop()
{
if (digitalRead(ButtonZ) == 0)
{
Keyboard.press('z');

delay(5);
}
if (digitalRead(ButtonZ) == 1)
{
Keyboard.release('z');

}
if (digitalRead(ButtonX) == 0)
{
Keyboard.press('x');

delay(5);
}
if (digitalRead(ButtonX) == 1)
{
Keyboard.release('x');

}
}

just use switch()

Anyone have a PCB guide ? Plz Help

Деньга дай =) нет деняг

UPDATE August 12, 2018:

Hi again everyone,

After slow progress on my end due to juggling different projects I have finished a rough draft of the newer updated guide. Hopefully, even with the rough formatting, people should find the ideas expressed in the doc easier to absorb than last time. However, for the time being, the guide exists as a doc file and currently not formatted to osu! forum standards.

Also, SANWA V2 has been finished.

Coming back, just to say thanks about this nice tutorial, you're the best
https://imgur.com/a/2WP4SMc

AddDominator wrote: 2p3o6q

Oof... the betrayal is real xD

The Gambler wrote: 6p2n66

AddDominator wrote: 2p3o6q

Oof... the betrayal is real xD

Thanks you for the tutorial <3

I've made an osukeyboard with a
mouse（ve broken、and a little box to cover them，but now it still have no lights and not goodlooking at all
Here I am Looking forward to develop an new kind of osuing key board which's able to put one all hand on it and give players a much more comfortable enverment to power there brain（IQ+10
（:DL

ZisonZishen wrote: 6v3o1b

I've made an osukeyboard with a
mouse（ve broken，keys and a little box to cover them，but now it still have no lights at all，and not goodlooking
Here I am Looking forward to make an new osu key board which's able to put on fingers and more cheap（:D
and it's still an idea lol

https://www.youtube.com/watch?v=jM598vSvPu0&t=221s Try this

AddDominator wrote: 2p3o6q

ZisonZishen wrote: 6v3o1b

I've made an osukeyboard with a
mouse（ve broken，keys and a little box to cover them，but now it still have no lights at all，and not goodlooking
Here I am Looking forward to make an new osu key board which's able to put on fingers and more cheap（:D
and it's still an idea lol

https://www.youtube.com/watch?v=jM598vSvPu0&t=221s Try this

ahh，39

Skylone18 wrote: 38454c

Just a question;
Are you using any resistors?
I see a resistor in the first figure of your guide, but on second figure and in the third one, I do not see any.

Arduino leonardo don't need resistors

https://imgur.com/a/8cU9PEZ
Thanks to Ruqimao and Gambler <3

A few billion years late, but how do you suppose you would get cherry mx slivers?

genericgarbage wrote: 6585i

A few billion years late, but how do you suppose you would get cherry mx slivers?

I don't think MX Silver is marketed as a custom keyboard product. I would rather you check out other switches instead: https://input.club/the-comparative-guide-to-mechanical-switches/

Since you said you wanted Silvers, I suggest looking at other equivalents like Kailhua Red, BOX Red, Gateron Clears, Matias Linear, etc.

UPDATE 02/09/2019: Small updates for you guys. I ed the full version of my own working code onto the repository, along with some repo cleaning. Hopefully, everything should make a bit more sense.

I have also prototyped some PCBs along the way, like the 8-Pack and the 4-Square, each under their own repositories in my . Should make for some more compact and interesting builds.

Otherwise, just letting you know that I'm still here (as once in osu!, always in osu!).

Happy clicking

Hey, I want to buy Redragon ARYAMAN K569 (it comes with Outemu blue switches). I wanted to ask if it's possible to replace a few switches in it with other switches? (like i want to replace one Outemu blue switch with Cherry MX Red). Is that doable easily?

srafay wrote: 714c3d

Hey, I want to buy Redragon ARYAMAN K569 (it comes with Outemu blue switches). I wanted to ask if it's possible to replace a few switches in it with other switches? (like i want to replace one Outemu blue switch with Cherry MX Red). Is that doable easily?

Does the keyboard have removable switch feature? If so you can just use keypuller to remove the switch and replace it. Otherwise you have to resolder the PCB to remove the switch and reinstall it again, which I don't recommend.
Here's an example of removable switch keyboard that I have

[Zarc] wrote: 475g54

srafay wrote: 714c3d

Hey, I want to buy Redragon ARYAMAN K569 (it comes with Outemu blue switches). I wanted to ask if it's possible to replace a few switches in it with other switches? (like i want to replace one Outemu blue switch with Cherry MX Red). Is that doable easily?

Does the keyboard have removable switch feature? If so you can just use keypuller to remove the switch and replace it. Otherwise you have to resolder the PCB to remove the switch and reinstall it again, which I don't recommend.
Here's an example of removable switch keyboard that I have

Thanks for replying. The keyboard you have seems to be available only in your country I guess. After checking it's specs, it seems that it has Outemu blue switches. How is your experience with these switches (stream maps in which you need to double tap or maps in which you need to tap faster)

srafay wrote: 714c3d

Hey, I want to buy Redragon ARYAMAN K569 (it comes with Outemu blue switches). I wanted to ask if it's possible to replace a few switches in it with other switches? (like i want to replace one Outemu blue switch with Cherry MX Red). Is that doable easily?

Yes, you will have to desolder the switch and LED using a soldering iron, and solder wick/desoldering pump. You have to be careful in the process as you do not want to rip out PCB pads when removing the switch.

After you have desoldered the old switch, you will need to clean the hole where the switch pin used to be, then solder in the new switch, plus LED.

srafay wrote: 714c3d

[Zarc] wrote: 475g54

srafay wrote: 714c3d

Hey, I want to buy Redragon ARYAMAN K569 (it comes with Outemu blue switches). I wanted to ask if it's possible to replace a few switches in it with other switches? (like i want to replace one Outemu blue switch with Cherry MX Red). Is that doable easily?

Does the keyboard have removable switch feature? If so you can just use keypuller to remove the switch and replace it. Otherwise you have to resolder the PCB to remove the switch and reinstall it again, which I don't recommend.
Here's an example of removable switch keyboard that I have

Thanks for replying. The keyboard you have seems to be available only in your country I guess. After checking it's specs, it seems that it has Outemu blue switches. How is your experience with these switches (stream maps in which you need to double tap or maps in which you need to tap faster)

I'm using Outemu brown now though, I bought them separately. My keyboard can only use Outemu switch, that sucks. They are ok but It feels like Cherry MX has shorter travel distance than Outemu. I can play stream maps just fine with them, sometimes I can stream up to 220 bpm.

shortpotato wrote: 313k5y

howdo i get razer switches?? i heard all the cool kids have them D:

Those switches arent very good

thx for the list, i will try to do it when i get the time/money for it ofc qwq