ZNeoG wrote: 5ul1r

SmartScreen came up with a message that says the application is dangerous :/

That is unfortunately possible yeah. SmartScreen checks programs for things like few s, author reputation and if the software is signed. The count is probably still considered low and I haven't spent a lot of money on expensive g certificates (hence it'll say Unknown Author when you want to run it).

I should probably really look into at least basic g of the program so SmartScreen has more information to use. But for now this is the main reason I placed all the source code on GitHub. That way you can always ask someone you trust with programming experience to check the code and/or compile the program.

Ty so much c:

Shemkhh wrote: 1c6p3p

Ty so much c:

You're welcome ^^

Hot hot hot, thats pretty hot. Damn finally a nice programm that does this tidious work for me.
Thank you!

- Founntain - wrote: 3j9y

Hot hot hot, thats pretty hot. Damn finally a nice programm that does this tidious work for me.
Thank you!

Glad it is useful to you

It isn't working for me.It stops right before finishing. What do i do?

csabi215 wrote: ku6g

It isn't working for me.It stops right before finishing. What do i do?

Do you have any more specific problem information? If the program ran into some internal error I think that in all cases an error dialog is displayed with some more information. If that isn't the case could you try running the program from the command line (cmd/powershell -> shift+right clicking in the folder with the program should show the option in the list and then the command is simply the name of the exe which you should be able to tab autocomplete). It might be that more error information is logged to the console.

Currently I have no idea what the cause might be though. Does it only happen for a certain folder or does for example a folder with just a single image in it also have an issue.

Once I have some idea of what might be the cause of your issue I'll try to fix it >_>

Very nice build! I'm looking forward to the next versions!

problems, exist a minimal storage of elements for convert?

ChronosRark1st wrote: 6bu6h

problems, exist a minimal storage of elements for convert?

I'm sorry, I'm not quite sure if I get what you mean.

The number of images to convert does not matter it can be 0 or more.
It should also be possible to convert images of any size though if your images are huge then you might have to allocate more RAM, but I doubt that is the case.
Note though that the default filter only accepts files of type .png .jpg .jpeg .PNG .JPEG .JPG.
Also note that the name of the file to convert has to end in @2x.
Besides that enough disk space has to be free to be able to write the rescaled file, but I'm fairly sure it'll give you a notification if this is not the case.

If none of this answers you question then I'm afraid I did not understand the question ;-;

Alright, a simple question here. Will this work with animated skin elements?

ashiapnojutsu wrote: a1w2f

Alright, a simple question here. Will this work with animated skin elements?

Oof, sorry for the late reply, if you're talking about a regular osu! skin animation where each frame is simply a separate png file then yes it should. It'll simply downscale each individual image.

THANK YOU SO MUCHHHHHHHHH THE SKIN FINALLY WORKED

Working Fine for now, nice!
Thanks!

Flavoreddit wrote: 1a5f6x

THANK YOU SO MUCHHHHHHHHH THE SKIN FINALLY WORKED

Nice

Arcss wrote: 356i4o

Working Fine for now, nice!
Thanks!

Your welcome

can someone tell how to use it

MattTheMysthYt wrote: 6e4q3h

can someone tell how to use it

This is especially for guys who create skins. Normally, the skinner created some HD elements (@2x files) and this program create normal files with the standard resolution (without @2x).

If you use this to do the thing I talked about in the previous paragraph, you need just in 'Input Folder' put you skin folder and press Start, the program is already configured to do that

MattTheMysthYt wrote: 6e4q3h

can someone tell how to use it

I hope that Corne2Plum3's explanation answered your question. If you have any more specific questions feel free to ask them.

thank you very much for this.

ich1g0 wrote: 37327

thank you very much for this.

You're welcome

I am currently re-working on my skin and I didn't done the SD images, thanks a lot! 😄

IncrediMan wrote: q2923

I am currently re-working on my skin and I didn't done the SD images, thanks a lot! 😄

Glad I was able to help out

Thanks dude!! You're my hero xD

habibiyaudah wrote: 6w5j1y

Thanks dude!! You're my hero xD

Happy to hear that

how can i upscale an image?

Kuzuga wrote: 6dl10

how can i upscale an image?

You should be able to just enter a value for the scaling factor that is greater than 1.0. If that doesn't work for some reason, please let me know.

That being said, usually upscaling an image doesn't really get you more quality or anything just more pixels. If you want to upscale an image and get a good result you're better off using something that tries to guess what a larger version of the image would've looked like such as https://github.com/nagadomi/waifu2x

It finally works!

Thank you!

Xenos_2064 wrote: 6y4q23

It finally works!

Thank you!

Nice!

I wasn't aware that something was previously broken though

Corne2Plum3 wrote: 2mx5n

MattTheMysthYt wrote: 6e4q3h

can someone tell how to use it

This is especially for guys who create skins. Normally, the skinner created some HD elements (@2x files) and this program create normal files with the standard resolution (without @2x).

If you use this to do the thing I talked about in the previous paragraph, you need just in 'Input Folder' put you skin folder and press Start, the program is already configured to do that

ty so much and sorry late respond

Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?

LameO3000 wrote: 734t73

Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?

Look up.

Corne2Plum3 wrote: 2mx5n

MattTheMysthYt wrote: 6e4q3h

can someone tell how to use it

This is especially for guys who create skins. Normally, the skinner created some HD elements (@2x files) and this program create normal files with the standard resolution (without @2x).

If you use this to do the thing I talked about in the previous paragraph, you need just in 'Input Folder' put you skin folder and press Start, the program is already configured to do that

LameO3000 wrote: 734t73

Hey there, ur program sounds cool, will this help out like lag caused by the skins? and also how do I use it?

I hope that TTChaos' answer addressed the usage part of your question. As for whether it will help out with lag caused by skins. I would assume that it does not, this program is a tool for skinners to use when making a skin to make it easier to make SD elements, if you already have a completed skin there's not really a need to run this program. And there's not really a significant different performance wise when it comes to images created manually and images generated by this program.

@ 2x has been added to all file names. Can this option be turned off? Do you have to delete all yourself (^ ～ ^;) ゞ
EDIT: One of the files has been changed by the program from .png to .psd.
Some files are double - one with @ 2x and the other not, as I am supposed to understand the ones without are the unscaled ones

does it work on standard to @2x

wow it's working thankyou dude

dawwideq wrote: 4g6z3a

@ 2x has been added to all file names. Can this option be turned off? Do you have to delete all yourself (^ ～ ^;) ゞ
EDIT: One of the files has been changed by the program from .png to .psd.
Some files are double - one with @ 2x and the other not, as I am supposed to understand the ones without are the unscaled ones

If you are running with default settings then no names will get @2x added to them and no extensions will be changed either. The idea is that you run this on a skin with HD elements (@2x files) and then SD elements will be generated automatically (files without @2x) and that's what the default settings are configured to do. I'm not quite sure how you got some of the results you're describing, so if you have detailed steps to reproduce them I'd be interested.

YesRythm wrote: 242l

does it work on standard to @2x

Technically yes, but note that upscaling an image only gets you more resolution not quality. If you want to upscale an image and increase its quality you may want to take a look at waifu2x.

pithau wrote: 1kc67

wow it's working thankyou dude

You're welcome

ooo

Hey, i have a question abut this program

How i can Downscale images with this progam?

JakeBlade2017 wrote: 663p2q

Hey, i have a question abut this program

¿How i can Downscale images with this progam?

You can set the scaling factor in the GUI, this is the number that the dimensions of the input images will be multiplied with to create the output image. So a number below 1 means images get downscaled, a number equal to 1 means the output becomes the same as the input and a number greater than 1 mean the images get upscaled.

Hello! I know this is an old thread but this solution worked and thank you! I can definitely use this program not only for osu! but for other things as well when it comes to images.

BukoPie wrote: 3f5s1h

Hello! I know this is an old thread but this solution worked and thank you! I can definitely use this program not only for osu! but for other things as well when it comes to images.

I'm glad it is useful to you

Could you do it for me? I tried, and didn't work.. https://skins.osuck.net/index.php?newsid=1107 (CK version)

xzintocatgirls wrote: 381g1w

Could you do it for me? I tried, and didn't work.. https://skins.osuck.net/index.php?newsid=1107 (CK version)

what error are you getting? Just simply saying it doesn't work and expect people to do the task for you ain't it.

If you're really confused how it works, all you have to do is insert the file location for both input and output folder at the top - you can relocate the output folder by unchecking the "write to input folder".

If you did try but still no avail, I think your images are located in a new file. Try searching something like "Not applicable, input is a file" outside the program.

this is very helpful, thank you

NasiGaPakeNasi wrote: 4x5t1g

this is very helpful, thank you

Thanks

Imma ask if this program will exist in android? I rlly need it xD

ManJebs wrote: 4j2q1x

Imma ask if this program will exist in android? I rlly need it xD

I currently do not have any plans (or time) to port the program to Android. This would be quite a lot of work, so unless it becomes a common request I probably won't do it. Honestly I didn't even know people made skins on their Android devices >_>

How do I make the picture 16;10 aspect ratio? or 1650x1050 resolution?

CrimsonKyle wrote: 5w4u2l

How do I make the picture 16;10 aspect ratio? or 1650x1050 resolution?

If you have an existing picture with the correct aspect ratio you can just compute which factor you need to scale down by. If you do not have a picture with the correct aspect ratio you will need to first cut your image to the correct size with some image editing software.

Hii i had a trouble with my osu skin on mac due to the mod selection doesn't show the skin. So i was wondering can mac use this image scaler too?

EmelyKuro wrote: 6e4q3u

Hii i had a trouble with my osu skin on mac due to the mod selection doesn't show the skin. So i was wondering can mac use this image scaler too?

Hey, the program should run just fine on mac, specifically the Java Archive version and assuming you have Java installed. I'm not sure if it would solve the issue you're having with your skin though.

Ahh alright!! thank you so much for telling me!

this works so well!!!!

Bluecord6411 wrote: 505x1

this works so well!!!!

Thanks

stupid question, can i convert 16:9 skins to 16:10 with this? how to do it?

oozorasubaru1 wrote: 5i5c8

stupid question, can i convert 16:9 skins to 16:10 with this? how to do it?

You can't, this program is purely for batch image resizing so the aspect ratio will remain the same. It also wouldn't really be possible to automate changing the aspect ratio of a skin in many cases as you'd effectively need to create new content out of nothing (otherwise the images would need to stretched or cut).

can i get some tutorial?

i want to use it for HD to SD

GoodRacer900 wrote: 6j2i4h

can i get some tutorial?

i want to use it for HD to SD

That's what the default settings are for, so all you need to do is set the input folder to the skin folder and optionally change the output folder if you want the SD files in a separate location. And then you just press 'Start' and wait for it to finish.

Очень полезная программа! Для тех ,у кого слабый пк:)
=====================================================
A very useful program! For those who have a weak PC:)

Roan wrote: 416a1m

GoodRacer900 wrote: 6j2i4h

can i get some tutorial?

i want to use it for HD to SD

That's what the default settings are for, so all you need to do is set the input folder to the skin folder and optionally change the output folder if you want the SD files in a separate location. And then you just press 'Start' and wait for it to finish.

thanks

KGB_RUSSIAN wrote: 3n207

Очень полезная программа! Для тех ,у кого слабый пк:)
=====================================================
A very useful program! For those who have a weak PC:)

Thanks

GoodRacer900 wrote: 6j2i4h

thanks

No problem

Very useful, thank you!

Can you use this to make a skin from 1960x1080 to 2560 x 1080
coz my monitor is ultra wide :/

and can someone tell me how to do it if possible

Flying_Dino wrote: 4k1b6e

Can you use this to make a skin from 1960x1080 to 2560 x 1080
coz my monitor is ultra wide :/

and can someone tell me how to do it if possible

No you can not, for that you need to edit the source files yourself. This program simply generates SD images from HD images

It wont find any files to rescale! How do i fix this?

Daniel_osu wrote: 2f3a4s

It wont find any files to rescale! How do i fix this?

You're going to have to be a bit more specific. Also note that by default it looks for image files than end in @2x in the folder you select as input.

thank you so much, this is amazing...

SF JBaoz wrote: 4wv2l

thank you so much, this is amazing...

You're welcome and thank you for using it

Oh nice that's so cool

Stomiks wrote: 65184i

Oh nice that's so cool

Thanks

Hii, I was wondering if the file had a virus as Microsoft SmartScreen seems to have detected that it might be a risk...

Juakitoxis wrote: 22z6g

Hii, I was wondering if the file had a virus as Microsoft SmartScreen seems to have detected that it might be a risk...

Hi, basically SmartScreen is telling you the application is unsigned and therefore nothing is known about the publisher, making it untrusted. Which makes sense, since as far as Microsoft is concerned I'm just a random person they have no reason to trust. The normal way to make applications trusted by Microsoft is to buy extremely expensive g certificates, but those would cost me hundreds of euros each year, which is not really something I can afford to do for a project that makes me no money.

So in the end the decision of trust lies with you, if you think I'm trustworthy you can hit "Run anyway", if not I understand that too. As long as you got the file from the official page (this forum post or the official GitHub page), then there are no viruses. If you want some extra certainty of that you can the file to VirusTotal, e.g., see https://www.virustotal.com/gui/file/c006d19649063ffe41d7dd174e5b0412da9690b6d0839e6e7b1c6d5f8e9a584c.

GRACIAS AMIGO ME AYUDASTE MUCHO. YA ME ESTABA VOLVIENDO LOCO CON LA SKIN BUGEADA

Innocents fc wrote: 2p5ho

GRACIAS AMIGO ME AYUDASTE MUCHO. YA ME ESTABA VOLVIENDO LOCO CON LA SKIN BUGEADA

You're welcome